The cut out fuse by the meter, is that 60A, 80A or 100A. It might say on given you already have a EV charger fitted.
If it’s 100A, you will get away with an extra charging circuit from the mains (Henley Blocks). If it’s 80A you are pushing it for 2 seperate charging circuits and you may want to promt the installer, that you want charging capped by CT Clamp (load balancing) where one charger can take precedence, rather than physically just limiting the charger/s outputs to 3.6kW, should the likes of Ohme Pro’s be installed.
Are you in Scotland and within reach of Bumblebee charge point installers?
