@kezo Checked it again just after 00:30 still 6kW App load limit is set at 60A, Max charge is set at 32A, I have an 80A fuse fitted by the DNO
Max Charge 32A Load limit 80A Ohme will adjust is for you if you contact, with the serial number requesting the load limit is adjusted 60 to 80A. Its an installer mistake for not setting up commissioning the charger. The E-Pod requires the installers app if you want to have ago 🙂
@kezo I know yr da man to ask. Just come across this thread.
I’ve had my ePod installed just last week & my Ohme app is reporting the same as Phaedra.
load limit  60A – max charge 32A – & national grid dropped in a 80A fuse the day before the charger was installed.
Are these not the optimal settings?
on a side note, national grid didn’t replace the seal on the cut-out after replacing the new fuse! is this going to cause issues at a later date?
Tia
Tom…