@kezo Using the Ohme App. I just checked and it had my car as an Enyaq iv 80 2023 so re-registered the car and it now says Enyaq 85 2024 Just tried a max charge, Ohme App says Max Charging, CT Clamp changes from 1A to 32A but MySkoda App still at 6kW
Skoda app will show whats going into the battery after any losses – in the circuit, heat and the conversion of AC to DC by the cars onboard charger. However the loss of 1.4kW seems a bit much.
How long does your CT Clamp reading stay on 1A – Does the charger reduce kW’s output?
In daylight open your meterbox and look at the CT clamp, there will be an arrow on it (you might have to turn the clamp while in situ) is the arrow point up?
The CT will have a small fly lead that connects to 2 wire going to your charger – wiggle them about and see if they are tight.
The CT clamp monitors the total load used at the same time. If it detects you are reaching maximum, your home can handle, the charge rate will drop on your charger.
When your charger is idle not charging the CT will register a small amount rounded to about 1A. What does yours show?
Will your phone record whats on the screen, so we can see whats happening with the reading of charge kW and CT amps for half hour or so.
When you first plug in Ohme/Octopus will estabilsh connection test 5 10 min prior to schedule or charge on demand before actually ramoing up.
