I’m learning a bit about sunsynk inverters and what I’ve been doing is trying to charge the batteries to 100% charge.
So far I’ve increased the amps on the battery settings to “Charge Amps” 125 and “Grid Amps” to 100. The grid amps change has had the biggest impact as my batteries charged to 50% last night when it was set to 75A so hopefully the 25A increase will we me get closer to 100%.
The charge times need a wee bit of time to understand. I’ve set “Time 1” from 00:30 hrs to 05:30 hours to charge to 100%. I had left Time 2 unchecked but, the result of this is that after 05:30 my batteries would discharge to the grid until 20% charge us reached, the 20% charge was set by default I think. I have now set a Time 2 to discharge to 50% by 09:00 just to see if this works, then I can adjust all the time slots that suit my usage pattern🤞
The only person who got all his work done by Friday was Robinson Crusoe.
Anything i post over three lines long please assume it is an article lol.