[TheSUVguy]

First day with the Ariya (keep in mind it’s mums car, we’ve currently got a q3 that and are due to order in June) ohme pro installed in my driveway as mum hasn’t got a driveway (motability allow it as long as you live close)

so we’ve got the v3 British Gas tariff, 8.90p for 12-5am

So ideally I want the car to be charged during those times but even when scheduling one at 12-5 it just starts, I’ve done it on both the Nissan app and ohme

if someone can explain to me like I’m 10 that’ll be a great help

Topic

[Ioniq]

I tried scheduling a charge on the granny charger through the car, it didnt work.

I ve seen other have the same problem configuring the car to charge and configuring Ohme to charge and it doesnt work. They seem to conflict with each other.

The solution is to plug the charger into the car and ONLY use the Ohme setup to charge between 00.01 and 05.00.

Give that a shot.

But set the timer a minute past midnight.

[Pensioner1]

On the Ohme charger, set the charging rate and hours under ‘my energy’ Then under ‘ my charger’ there is a toggle switch that says’  price cap’ . Make sure that is enabled. The charger will then start at your off peak rate.  Hope that helps.

[Slimtrim]

Pensioner1 wrote:

On the Ohme charger, set the charging rate and hours under ‘my energy’ Then under ‘ my charger’ there is a toggle switch that says’ price cap’ . Make sure that is enabled. The charger will then start at your off peak rate. Hope that helps.

??

Plus, can also toggle the switch to override the price cap and charge as normal.

[TheSUVguy]

Ioniq wrote:

I tried scheduling a charge on the granny charger through the car, it didnt work. I ve seen other have the same problem configuring the car to charge and configuring Ohme to charge and it doesnt work. They seem to conflict with each other. The solution is to plug the charger into the car and ONLY use the Ohme setup to charge between 00.01 and 05.00. Give that a shot. But set the timer a minute past midnight.

 

I will try this tonight thank you

[TheSUVguy]

Pensioner1 wrote:

On the Ohme charger, set the charging rate and hours under ‘my energy’ Then under ‘ my charger’ there is a toggle switch that says’ price cap’ . Make sure that is enabled. The charger will then start at your off peak rate. Hope that helps.

I can only see the charging rate, no where to set the hours.

[Pensioner1]

To set the hours, choose “ my energy” then in blue you should see “edit”. This will then let you put the hours and pence for unit of your tariff.

[Author]

Replies